Fence Cost Lab · planning tools

Fence cost calculator.

Turn a transparent takeoff into a budget using your supplier's prices. See exactly what is—and isn't—included.

Fence cost calculator

Results update as you type. Units: feet for layout, inches for hole and post dimensions, cubic feet for concrete.

Your fence path

One connected, open path. Enter segments in order from one end to the other. Split at each corner and gate. Run lengths exclude gate openings; adjoining runs share one corner post.

feet
Material quantities
Panel mode treats framing as included; no separate rail charge.
feet per bay; use manufacturer post-to-post coverage
percent; spare materials, not extra fence bays
whole number; no holes or concrete for spares
Concrete dimensions & allowanceCurrent example: 10 in hole · 30 in fill · 0.6 cu ft/bag

Enter your planned hole dimensions, not a recommended footing size. All geometry defaults are examples. The post is assumed to occupy the full concrete depth; gravel below that depth is excluded.

inches; round, uniform holes
inches; exclude any gravel base
inches; measured size, not nominal size
inches
cubic feet per bag; use your product label
percent; applied to net volume once
Your prices · USD

These are illustrative prices, not live market quotes. Replace them with your supplier quote. Gate leaves, hardware, fasteners, tax, delivery and labor are excluded unless you budget for them below.

USD per complete panel, including its framing
USD per post; enter a blended price if post types differ
USD per bag
USD total; gate leaves, hinges, latches and fasteners
USD total; include delivery, permits or removal if needed

Planning quantities only—not a structural design, permit check or contractor quote. Confirm spans, post types, hole dimensions and build details with your supplier and local requirements.

Your takeoff

live estimate

14 installed posts, 13 fence bays, 30 concrete bags.

14installed posts
15panels to buy
30concrete bags
Total path / fence only100 / 100 ft
Gate openings0 · 0 ft
End / corner / gate posts2 / 0 / 0
Intermediate line posts12
Posts to buy14 (0 spare)
Installed bays / spare sections13 / 2
Separate rails to buy0 · included in panels
Concrete holes14 · installed posts only
Concrete volume + allowance17.72 cu ft

Per-segment check

Segments, lengths and fence bays
SegmentLengthBays
1 · Fence100 ft13

Budget breakdown

Panels$780.00
Posts, including spares$252.00
Separate rails$0.00
Concrete$180.00
Gates & hardware$0.00
Labor, tax & other$0.00
Illustrative project total$1,212.00
Cost per fenced foot (excludes gate width)$12.12

Shared corner and gate-boundary posts are counted once. This is an open path, not a closed loop, branching layout or disconnected set of fences. Different corner/gate post specifications may affect the quote.

Each run is rounded up separately. This assumes the final bay can be sized to fit; confirm whether your panel can be cut or requires a custom size. No picket, fastener or footing design is inferred.

See the formulas & worked example ↓
Check the arithmetic

How to estimate fence cost without double counting

Multiply purchased quantities by your own prices. Keep bundled panel framing separate from loose rails, and add gate hardware and non-material costs explicitly.

Formulas used

Fence bays = Σ ceil(run length / bay width or spacing)

Installed posts = fence bays + gate openings + 1

These post counts apply to a single non-empty, connected open path. A zero-length project has zero installed posts. Every shared boundary is counted once.

Sections to buy = ceil[bays × (1 + material allowance / 100)]

Loose rails follow the same allowance, multiplied by your rails-per-bay input. Panels include their framing in this budget model.

Total = sections × price + posts × price + loose rails × price + bags × price + gates/hardware budget + labor/other budget

Concrete is calculated from installed holes, minus the embedded post volume. Spare posts do not receive concrete. See concrete geometry →

Worked example · not a quote or design

100 ft straight fence

Using the 100 ft straight-run example: 15 panels × $52 + 14 posts × $18 + 30 concrete bags × $6 = $1,212, or $12.12 per fenced foot. These prices are illustrative, not market quotes. Separate rails, labor, gate leaves, fasteners, tax and delivery are not included in that example.

Try the inputs above ↑

Before you order materials

  • Prefabricated-panel mode treats framing as included. Separate-infill mode adds the specified rails and a per-bay infill budget instead.
  • Post price is a blended input. If corner and gate posts cost more, adjust it or obtain a detailed supplier quote.
  • Use the gates & hardware budget and labor, tax & other budget for items beyond the counted panels, posts, rails and concrete bags.

Scope: level, regular bays along a single connected open path; identical cylindrical holes and solid posts. No closed loops, branches, disconnected runs or structural sizing. Calculation model updated October 1, 2026.

Common questions

Understand the estimate.

Is this an installation quote?

No. It is an arithmetic budget using your inputs. It does not provide regional market prices or calculate labor hours, difficult excavation, demolition, permit fees or delivery automatically.

Which length is used for cost per foot?

The total project budget is divided by fence-only footage, excluding gate-opening widths. If there is no fence footage, the unit cost is not applicable.