Estimate concrete bags from hole dimensions and actual post size. Subtract post volume, apply your allowance once, then round up.
Post concrete calculator
Results update as you type. Units: feet for layout, inches for hole and post dimensions, cubic feet for concrete.
Enter your planned hole dimensions, not a recommended footing size. All geometry defaults are examples. The post is assumed to occupy the full concrete depth; gravel below that depth is excluded.
Whole number; do not include spare posts.
inches; round, uniform holes
inches; exclude any gravel base
inches; measured size, not nominal size
inches
cubic feet per bag; use your product label
percent; applied to net volume once
Planning quantities only—not a structural design, permit check or contractor quote. Confirm spans, post types, hole dimensions and build details with your supplier and local requirements.
Your takeoff
live estimate
30 concrete bags.
30bags to buy
16.11net cubic feet
1.15cu ft per hole
Installed holes14
Post shapeRectangular
Bag yield0.6 cu ft
Volume with allowance17.72 cu ft
Concrete allowance10% · applied once
Cylinder volume minus the embedded post volume. Bags are rounded up once after summing all holes, assuming material can be shared between holes.
Subtract the post's cross-sectional area from the round hole before multiplying by the concrete fill depth. Use the yield on your actual concrete product.
Formulas used
Net cu ft / hole = [π × (D / 2)² − post area] × H / 1,728
D and H are hole diameter and concrete fill depth in inches. Rectangular post area is W × T; round post area is π × (d / 2)².
Bags = ceil[net cu ft / hole × holes × (1 + allowance / 100) / bag yield]
Worked example · not a quote or design
14 holes, actual post dimensions
For 14 holes, each 10 in in diameter with 30 in of concrete fill, and posts measuring 3.5 × 3.5 in: net concrete is about 1.151 cu ft per hole, or 16.112 cu ft total. Apply 10% once, divide by an illustrative 0.6 cu ft/bag yield, and round up: 30 bags.
Hole and post dimensions are geometry inputs, not recommended installation sizes. Defaults do not account for frost depth, soil, wind, loads or local rules.
Use actual post measurements. The model assumes the post occupies the full concrete depth and that the hole is a uniform cylinder.
Exclude a gravel base from concrete fill depth. Bags are pooled across holes; damaged bags, over-excavation or per-hole mixing may require a different purchasing allowance.
Scope: level, regular bays along a single connected open path; identical cylindrical holes and solid posts. No closed loops, branches, disconnected runs or structural sizing. Calculation model updated October 1, 2026.
Common questions
Understand the estimate.
Why subtract post volume?
The part of a solid post inside the concrete occupies space that is not concrete. For hollow profiles, sleeves or unusual foundations, this simple solid-displacement model may not apply.
Should I round bags per hole?
This tool rounds once after totaling the volume for all holes, assuming leftover material can be shared. If your workflow cannot share it, use a separate per-hole purchasing plan.